The convenient way to install wall tiles and Grout

Today is a huge choice of wall tiles available for homeowners. The range is in fact never been so great in terms of design, color, pattern, size and material. There are many manufacturers that offer products in each bag and fit to each House.

There was a time when wall plates were considered suitable only for bathrooms and kitchens. But today people their living room, patio and even border walls with beautiful colourful plates are carpeted. Today wall tiles from all shapes, stretching from the very large to small and mosaic effect plates are available. Homeowners may even use motifs on the padded walls and give them a 3D effect. Motives come in different finishes and you can even find some with embedded lights or space.

With many useful products and install advice, tiled, the walls no longer regarded as a specialist job. Start creating a smooth, clean and even surface of plates. You can view the existing plates cracks or simply install the new chips on the old tiles. Removing old tiles is a difficult job that also involves certain risks. Always wear some glasses and good quality gloves when cracks or smoothing the walls.

The surface must be dry and free of moisture. If you are tiling the bathroom walls, you must ensure that the surface is dry. Prior to the establishment of the plates on the wall, a horizontal batten fixed and fixed a vertically. The battens will give you a clear idea about how much space is to be carpeted and pattern would want as best suite? Now spread a bed of glue with the help of a notched spreader on the smooth surface. Start from the Centre and relate to a specific area, probably one or two meters. Never glue on DAB the corners because it can lead to the plates to break.

Set the wall tiles in the preference, the scheme or the order that you previously identified. Also wipe excess glue of the plates and make sure you insert the tile spacers. Once the tiles are fixed on the wall you must grout them. Construction industry is going to make a paste of powdered Grout with a fluid that is water and push the grout right into the gaps between the tiles. Avoid the use of ready mixed sediment as they are difficult to use. When the construction industry bathroom wall tiles or near the area where they are likely to get wet, use a waterproof mortar.